Product ID:Q-8669 POLYMER CONCRETE OVERLAY RESIN
MSDS Date:01/01/1987
FSC:8010
NIIN:00F004842
MSDS Number: BBRDJ

QUALITY CONTROLLED IND/CORAOPOLIS, PA 15108

Emergency Phone: (412) 787-5221

Cage: EO951

QUALITY CONTROLLED IND/CORAOPOLIS, PA 15108

Cage: EO951

UNSATURATED POLYESTER

Fraction By Weight: 55%

STYRENE, MONOMER (SARA III)

CAS: 100-42-5

RTECS: WL3675000

Fraction By Weight: 45%

OSHA PEL 100 PPM

ACGIH TLV: S,50PPM/100STEL;9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

Effects of Overexposure:UPPER RESP TRACT
IRRITATION/UNCONSCIOUSNESS/HEADACHE/NAUSEA/VOMITING/DROWSINESS/VOMI
TING/WEAKNESS.

First Aid:SKIN: REMOVE/WASH CONTAMINATED CLOTHING/DECONTAMINATE
FOOTWEAR BEFORE REUSE. EYES: FLUSH W/WATER FOR AT LEAST 15 MINS.
INGESTION: DON'T INDUCE VOMITING. GIVE 1-2 OF WATER. NEVER GIVE
ANYTHING IF UNCON SCIOUS PERSON. INHALATION: REMOVE TO FRESH AIR.

Flash Point:74F
Lower Limits:6.1%
Extinguishing Media:CO2, FOAM, DRY CHEMICAL, HALON 1211. WATER MAY
INEFFECTIVE.
Fire Fighting Procedures:SCBA WITH FULL FACEPIECE & PROTECTIVE
CLOTHING.
Unusual Fire/Explosion Hazard:HEAVY VAPORS CAN FLOW ALONG SURFACES TO
DISTANT IGNITION SOURCES/FLASHBACK.

Spill Release Procedures:ELIMINATE SOURCES OF IGNITION/VENTILATE SPILL
AREA. WEAR SKIN, EYE & RESP PROTECTIONURING CLEANUP. CONTAIN
SPILL/KEEP OUT OF SEWERS/DRAINS. SOAK UP LIQUID WBSORBENT, & USING
NONSPARKING EQUIPMENT, SHO VEL INTO WASTE CONTAINER.

Handling and Storage Precautions:PREVENT SKIN/EYE CONTACT. AVOID
BREATHING VAPORS. CHECK WEEKLY TO DETERMINE INHIBITOR/POLYMER NTENT
IF STORAGE IS IN EXCESS OF 30 DAYS OF 90F.
Other Precautions:THIS IS USED IN CONJUNCTION WITH PROMOTERS,
CATALYSTS, ETC., OF OTHER MANUFACTURERS; FOLLOW THEIR SAFETY AND
HANDLING INSTRUIONS.

Respiratory Protection:IF NEEDED, USE MSHA-NIOSH APPROVED RESPIRATOR
FOR ORGANIC VAPORS.
Ventilation:USE LOCAL EXHAUST TO CONTROL EXPOSURES.
Protective Gloves:IMPERVIOUS
Eye Protection:GOGGLES/FACESHIELD
Other Protective Equipment:EYEWASH/SAFETY SHOWER IN WORK AREA. ARM
COVERS/APRON.
Supplemental Safety and Health
MSDS UPDATED.

Boiling Pt:B.P. Text:295F
Vapor Pres:4.3
Vapor Density:3.6
Spec Gravity:1.01
Solubility in Water:INSOLUBLE
Appearance and Odor:AMBER COLORED, AROMATIC LIQUID.

Stability Indicator/Materials to Avoid:YES
OXIDIZING MATERIALS, STRONG ACIDS, COPPER, AND COPPER ALLOYS
Stability Condition to Avoid:ELEVATED TEMPS, CONTAMINATION W/CATALYST
Hazardous Decomposition Products:CO2, CO, ACRID FUMES, PHENOL
DERIVATIVES, SMOKE.
Conditions to Avoid Polymerization:STYRENE FIRES PRODUCE COPIOUS
AMOUNTS OF DENSE SMOKE.

Waste Disposal Methods:COVER CONTAINER/REMOVE FROM WORK AREA. BECAUSE
OF A FLASH POINT <140F, DISCARDED PRODUCT IS A HAZARDOUS WASTE, NO.
D001, UNDER RCRA, 40 CFR 261.21. DISPOSE OF IN FACILITY PERMITTED
FOR HAZARDOUS WASTE .

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.